12V Electronic Load Battery Capacity Tester Module Load Battery Tester Discharge Board Burn-in Module
12V Electronic Load Battery Capacity Tester Module Load Battery Tester Discharge Board Burn-in Module by Wal front at Wakaf Center. MPN: Wal front5t8mf79qn0. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: Power Supply Voltage: DC12V(±5%) (equipment supply voltage) Maximum Load Voltage: 100V Constant Current Discharge Adjusting Range:
Power Supply Voltage: DC12V(±5%) (equipment supply voltage)
Maximum Load Voltage: 100V
Constant Current Discharge Adjusting Range: 0-20A
Work Mode: Constant current mode (CC)
Maximum Discharge Current Error: 0.7%-0.01A
Maximum Discharge Power: 250W
1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity.
2. Rotate knob to set constant current.
Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W.
1 x Electronic Load
Features & Highlights
- Basic functions:The Electronic Load can display voltage and current when discharging constant current, visually reflecting the discharge conditions.
- High performance:This electronic load uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25℃).
- Easy to see anf durable: Classical digital tube display, intuitive and durable, compared to LCD, it is more resistant to high temperature.
- Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.
- 100% power burn-in in factory, suitable for assembly of power adapter fully-automatic burn-in cabinet.
|Part Number:||Wal front5t8mf79qn0|
|Item Weight:||1.94 pounds|
|Item Size:||2.76 x 2.36 x 2.36 inches|