150W Constant Current Electronic Load Battery Capacity Tester Discharge Load Power Aging and Discharging Equipment Module for Mobile Power Pack Charger Testing with Heatsink Fan

Specifications:
Supply voltage: DC12V(±5%)
Current regulation range of constant current discharge: 0-10A
Discharge voltage range: 3.3V-60V, accuracy: 0.01V
Maximum capacity range: 99999mAH
Maximum power: 150W
Size: Approx. 14 x 10 x 6.5cm / 5.51 x 3.93 x 2.55inch
Quantity: 1PC
Weight: 410G

Usage method:
1.Set
Press the rotate button, the main interface and the setting interface will be switched.
In the setting interface, adjust the rotary button, changing the corresponding parameters in the setting interface. The clockwise adjustment is to increase the value. The counterclockwise adjustment is to reduce the value. The data will be saved automatically after the setting is finished. Set the value unchanged after power restart.
2.Discharge
Back to the main interface, press the "start / stop" button. The system will be based on the set data（Within the range of the stopping voltage）Discharge in a constant current mode! At this point, the system starts to work, and the parameters change.
3.Pause Discharge And Stop Discharge
During the constant current discharge period, press the "start / stop" key and the system will pause the discharge so long as you don't pull the battery out. Capacity and discharge time are not cleared. The system discharges when the "start / stop" button is pressed, capacity and discharge time will continue to count before the superposition. But if you pull out the battery or replace the battery during the pause, capacity and discharge time will be automatically cleared.

Package Included:
1 x Constant Current Electronic Load