MakerHawk USB 3.0 Tester Multimeter 3.7-30V 0-4A USB Voltage Tester USB Digital Current, Voltage Tester Meter Voltmeter AT34 and USB Load Tester Electronic Load Tester Resistor Module LD35 35W DC4-25V
Blowout Sale! Save 63% on the MakerHawk USB 3.0 Tester Multimeter 3.7-30V 0-4A USB Voltage Tester USB Digital Current, Voltage Tester Meter Voltmeter AT34 and USB Load Tester Electronic Load Tester Resistor Module LD35 35W DC4-25V by MakerHawk at Wakaf Center. MPN: 18AQK0G8D58S5912EETE. Hurry! Limited time offer. Offer valid only while supplies last. Technical Parameters: AT34: Measuring voltage: 3.7-30V Measuring current: 0-4A Capacity measurement range: 0-99999mAh Energy measurement range:
Product Description
Technical Parameters:
AT34:
Measuring voltage: 3.7-30V
Measuring current: 0-4A
Capacity measurement range: 0-99999mAh
Energy measurement range: 0-99999mAh-999.99Wh
Load impedance measurement range: 1Ω-9999.9Ω
Temperature measurement range: 0°C-80°C / 32°F-176°F
Operating temperature range: 0°C-45°C / 32°F-113°F
Product size: 64mmx22mmx12mm
LD35:
Rated operational voltage: DC4-25.0V
Max discharging power: 35W
Rated operational current: 0.25-5.0A (when fan don't work, the minimum constant current is 0.05A )
Fan Speed: Hydraulic bearing intelligent temperature control fan, speed 8000±10%RPM
AT34:
USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
LD35:
It is suitable for measuring the output current capability of the charger, using the bulk aging test of the charger factory, and measuring the quality of the Micro USB charging cable and the Type-C charging cable.
This product is not reverse polarity protection, the input polarity can not be reversed, otherwise the product is permanently damaged and cannot be repaired!
LD35 Upgrade function:
Display upgrade; Protection upgrade; Interface upgrade; Cooling upgrade; Precision multi-turn potentiometer; Hydraulic bearing intelligent temperature control fan.
Note:
If you want to buy a single product AT34, please go to our store. Thank you!
Package Including
1 * LD35 USB Load Tester with LED Display
1 * AT34 USB Tester
AT34:
Measuring voltage: 3.7-30V
Measuring current: 0-4A
Capacity measurement range: 0-99999mAh
Energy measurement range: 0-99999mAh-999.99Wh
Load impedance measurement range: 1Ω-9999.9Ω
Temperature measurement range: 0°C-80°C / 32°F-176°F
Operating temperature range: 0°C-45°C / 32°F-113°F
Product size: 64mmx22mmx12mm
LD35:
Rated operational voltage: DC4-25.0V
Max discharging power: 35W
Rated operational current: 0.25-5.0A (when fan don't work, the minimum constant current is 0.05A )
Fan Speed: Hydraulic bearing intelligent temperature control fan, speed 8000±10%RPM
AT34:
USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
LD35:
It is suitable for measuring the output current capability of the charger, using the bulk aging test of the charger factory, and measuring the quality of the Micro USB charging cable and the Type-C charging cable.
This product is not reverse polarity protection, the input polarity can not be reversed, otherwise the product is permanently damaged and cannot be repaired!
LD35 Upgrade function:
Display upgrade; Protection upgrade; Interface upgrade; Cooling upgrade; Precision multi-turn potentiometer; Hydraulic bearing intelligent temperature control fan.
Note:
If you want to buy a single product AT34, please go to our store. Thank you!
Package Including
1 * LD35 USB Load Tester with LED Display
1 * AT34 USB Tester
Features & Highlights
- The AT34 uses a 0.96-inch IPS high-definition color LCD display to display the state of charge of the appliance, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators at a glance. 160 degree wide viewing angle, high brightness and long working life.
- AT34: Fast charge recognition, widely compatible; 4-bit accuracy for more accurate measurements; Power-off storage, data is guaranteed; Thermometer function, Celsius and Fahrenheit free switching; Measure the quality of the charger; USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
- LD35: Heat dispatch method: Hydraulic bearing intelligent temperature control fan + All aluminum heat sink; Provide 4A, 25V, 35W (3 values are not exceeded) constant current test discharge task. It is suitable for measuring the output current capability of the charger, using the bulk aging test of the charger factory, and measuring the quality of the Micro USB charging cable and the Type-C charging cable.
- LD35: Working temperature: -10℃-40℃; Adjustable potentiometer: Precision multiloop adjustable potentiometer; Display mode: 4 bit LED tube; Expansion port: Micro USB port, Type-C port; Product size: 83.8x41.1x27.9mm.This product is not reverse polarity protection, the input polarity can not be reversed, otherwise the product is permanently damaged and cannot be repaired!
- If you have question about how to use our item, please feel free to email us. How to email us? Click "MakerHawk-US" and click "Ask a question". Thank you very much!!!
Additional Information
| Manufacturer: | MakerHawk |
| Brand: | MakerHawk |
| Color: | AT34 + LD35 |
| Part Number: | 18AQK0G8D58S5912EETE |
| Publisher: | MakerHawk |
| Studio: | MakerHawk |
| MPN: | 18AQK0G8D58S5912EETE |
| UPC: | 192684493633 |
| EAN: | 0192684493633 |
| Item Weight: | 0.15 pounds |
| Item Size: | 1.62 x 1.1 x 1.1 inches |
| Package Weight: | 0.2 pounds |
| Package Size: | 4.29 x 1.34 x 1.34 inches |