Product Description & Reviews
This controller enclosure measures 12'' x 10'' x 8" (300 x 250 x 200 mm). There are two factory pre-cut holes for 1/16 DIN sized controller on the front panel. Two 1/16 DIN sized controllers can be installed with adequate room for wiring and switching device. The box is made of powder coated, 0.040" (1 mm) thick steel. One side of the wall has a pre-cut opening. It can be used for installing cables or a heat sink. The door comes with a lock and key. The hinge of the door are removable. It can be installed on either right or left side. This allows the user put the pre-cut opening either on top or at the bottom without changing the door opening directions. Gasket and plugs are provided. It is rated for IP65 before any wholes are cut. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with hangers. For high power circuit, wall mount box is preferred because the heavy cords (14 AWG or thicker) are difficult to manage with a table top enclosure. Grounding lugs with M6 thread are located on the inner side of both the front cover and the body of the box. Hangers (4pcs) are also included. (PID controllers are not included.) The box has a pre-cut hole on the top for external heatsink. The external mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. It is more efficient and keeps the internal of the controller box free from the dust. 60A heat sink is offered. This heat sink come with pre-drilled and tapped mounting holes for the box and SSR. It haa mounting holes for two SSRs. Mounting screws and thermal conductive grease are included. There is no need to cut or drill for installing the heat sink.
Features & Highlights
- 12x10x8" Enclosure
- Factory Pre-cut for 2 x 1/16 DIN sized controllers
- 1.5 mm thick steel, powder coated
- 60A heat sink included
- Removable door with lock and key
|Package Weight:||8.95 pounds|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By Auber Instruments
mpn: B404020-HB, ean: 0701098739079,
This controller enclosure measures 16'' x16'' x 8'' (400 x 400 x 200 mm). Four 1/16 DIN sized controllers or timers can be installed with adequate roo...