Wall-mount Enclosure for 4 Controllers w/ Heat Sink 16x16x8"

This controller enclosure measures 16" x16" x 8" (400 x 400 x 200 mm). Four 1/16 DIN sized controllers or timers can be installed with adequate room for wiring and switching device. The box is made of powder coated, 0.060" (1.5 mm) thick steel. The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included).

An external mounted heat sink for 80 Amp is included. The heat sink comes with pre-drilled and tapped mounting holes for SSR mounting. Up to 3 SSRs can be mounted. This external mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. The dimension for the heat sink is 135mm x 250mm x 30mm (5.3" x 9.9" x 1.2"). One heat sink cover plate is included. It is useful when you install that heat sink to the top opening of the box.

The top opening of most enclosures on the market is too large for mounting an external heat sink directly on it. In order to do so, the user would have to seal the opening then cut a smaller hole. Auber's B404020 is specifically made so that the top opening of the enclosure is the perfect size for the heat sink it comes with. Not only does it save time and labor, but it also fits and looks better.

Part list:
Enclosure: 1 pc
80A heat sink: 1 pc
Heat sink cover plate: 1 pc
Screws for heat sink cover: 10 pcs
Soft caps: 6 pcs
Grounding sticker: 1 pc
Hanger: 4 pcs
Hanger screw and nut: 4 sets