Wall-mount Enclosure for Electric Brewery Control Panel

This 16 x 16 x 8" enclosure is for the Electric Brewery Control Panel published by "theelectricbrewery.com" with few small modifications.

The enclosure comes with an external mounted 80A SSR heat sink. The heat sink mounting of the original design involves several steps of preparation to fit properly. We made a larger heat sink with a clean look. It offers three sets of mounting holes for the SSR. The dimension for the heat sink is 138mm x 260mm x 30mm (5.5" x 10.0" x 1.5").

The beige colored paint is very difficult to paint than the black color. Any imperfection of the top paint, or small scratch by the normal use will expose the base color. So, we changed the base paint to a strong and durable industrial flat textured black finish. It makes the final finish paint easier. Or, you can use it without any further paint.

The box is made by 0.060" (1.5 mm) thick steel. The mounting holes for the two chromed handles are not drilled because some customer may not use it. The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket, plugs and hangers are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers.

Small screw holes for socket mounting were not tapped, but left for the user to drill, so that the mounting orientation and screw type option will be more flexible during the installation. The opening for XLR connector is about 22mm.

For front/bottom panel precut dimensions, please check theelectricbrewery: https://goo.gl/mBFEp1

For 50A configuration request, please call us at 770-569-8420, so we can discuss it over the phone.